Frequently Asked Questions
Common questions about working with Survco — from flight settings to outputs and turnaround times.
Do you provide drone mapping flights?
No. SURVCO is a drone data processing company. We process imagery collected by surveyors, contractors and drone operators worldwide — we do not fly drones or conduct site surveys. You fly, we process.
What software do you use to process drone imagery?
We use Agisoft Metashape for all photogrammetric processing — point cloud processing, orthomosaic generation, DEM/DTM production and 3D model generation. Quality checks are applied at each stage before delivery. Metashape outsourcing is available for operators and firms who prefer to outsource their processing workload entirely.
Can SURVCO process any drone dataset?
We can process most datasets, but survey-grade outputs require appropriate control.
RTK/NTRIP, GCPs or other verified control methods are required to verify accuracy. Without control, the absolute accuracy of outputs cannot be verified.
What image overlap do I need for drone mapping?
For most mapping jobs, use 75–85% frontal overlap and 70–80% side overlap. On complex terrain, tall stockpiles, or sites with structures, increase to 85% in both directions. Insufficient overlap is the single most common cause of poor stitching and processing failures.
Do I need ground control points (GCPs)?
GCPs are required if you need sub-10 cm absolute accuracy — for example, when your outputs need to create or match a surface, or be used for engineering-grade deliverables. Our GCP integration service handles control point marking and accuracy verification as part of your processing job. For stockpile volume tracking across multiple runs, consistent GCPs are strongly recommended so each dataset ties to the same reference and comparisons are reliable. For visual outputs only, GCPs are optional. Even with an RTK drone on a network correction source, we still recommend GCPs — they remove any geoid uncertainty and give you a verified, trustworthy result. GCPs are still the preferred approach where survey-grade accuracy is the goal.
What drones and file formats do you accept?
We process imagery from any drone that captures geotagged photos — DJI, Autel, senseFly, WingtraOne, and others. We accept JPG, DNG, and TIFF. Do not compress, resize, or edit images before uploading — we need originals with EXIF metadata intact. RAW files are welcome alongside JPG.
What altitude should I fly at?
Most operators default to 80–120 m AGL, but lower altitudes generally produce better results — finer ground sampling distance means more detail in your point cloud, surface model, and orthomosaic. For quality survey-grade outputs, 55–75 m AGL is worth aiming for where site conditions allow. Always fly at a consistent height above ground level, not above your takeoff point — on sloped sites, use terrain-following mode if your drone supports it.
Does RTK mean I don't require GCPs?
RTK significantly improves absolute positional accuracy, often achieving 5–10 cm when connected to a correction source (e.g. NTRIP network). However, we still recommend GCPs even with RTK — correction signal quality can vary, and GCPs remove any geoid uncertainty to give you a verified, trustworthy result. For survey-grade deliverables, GCPs remain the preferred approach.
What weather conditions are suitable for drone mapping?
Overcast days are ideal — flat, diffused light reduces harsh shadows that can confuse processing software. If flying in sunshine, do so near midday to minimise shadow length. Avoid flying in rain, drizzle, patchy cloud cover, or strong winds. In NZ especially, check MetService and Windy before heading out — conditions change fast.
How accurate will my outputs be?
Accuracy depends on flight settings, overlap, GCP placement, and quality of GCP coordinates. With well-flown imagery and good GCPs, we routinely achieve 2–5 cm horizontal and 3–5 cm vertical RMSE on our orthomosaic processing and elevation outputs. Without GCPs, typical accuracy is 1–3 times the GSD (ground sampling distance). We process using Metashape and apply quality checks at each stage, but we cannot guarantee a specific accuracy unless agreed in writing.
How long does processing take?
Most jobs are returned within 24–72 hours. Turnaround depends on the number of images and complexity of the site. See our pricing page for turnaround details by service — priority processing is available on request, just get in touch before uploading.
What if some of my images are blurry or underexposed?
A small number of blurry or poorly exposed images won't usually cause problems if overall overlap is sufficient. However, widespread blur, consistent underexposure, or large gaps in coverage can result in holes, blurring, or failed processing. If we identify a significant issue with your dataset, we'll contact you before proceeding rather than delivering a poor result.
What coordinate system should I use for GCP data?
Use the coordinate system and vertical datum required for your site. Note it clearly in your project details file so we can process correctly — for example, Mt Eden 2000 with NZVD2016 for vertical.
What types of processed outputs do you deliver?
Orthomosaic processing (GeoTIFF), DEM and DTM processing, stockpile volume calculations, and point cloud processing. All deliverables include a quality report. Additional outputs such as contour lines are available — contact us to discuss your requirements.
